Spacer Home
Homet spacer, unlike the current spacers that are placed between the glass, the Homet spacer is placed around the glass, the inside of the Homet spacer consists of three grooves, the two side grooves are where two single-pane glasses are placed, and the middle groove is where silica gel is poured (moisture and the spacers are connected to each other by a 90 degree corner.
The advantages of Spicper Home:
Reduces glue consumption by 70% Glass breakage is minimized The production process becomes faster Double-glazed glass is more insulating It saves time The production site will no longer be cluttered and crowded The cost of production is reduced In the production of double-glazed glass with the current spacer available in the market, when producing the glass for gluing, they usually put it on a table or vault to apply the glue, and after the glue is applied, you have to wait a long time for the glass glue to dry so that you can move it. and this causes a lot of time to be wasted and a lot of space is occupied in the production place. But by using Spacer Homet, your workplace will no longer be crowded and cluttered, and it will not be full of glued glass, and you no longer need to spend a lot of time waiting for the glue to dry, and you can load the glass after production. : Hummet spacer because it is placed around the glass, it acts like a strong protector, and this makes the double-glazed glass more resistant and the glass does not break easily, and against damage caused by transportation, moving, and during installation and re-installation of broken glass. Minimizes glass.